MENU
Company News Industry News Mould Blog Tweets

Industry News

  >   News  /   Industry News

Underbody shield mold

Join Date: 2018-12-31

MDC Mould has produced many kinds of underbody shield parts including GMT, GMT+LWRT, GMT+GMTex, LWRT process, etc.

However, with new material development in recent years, increasing numbers of automotive manufacturers are using continuous-fiber-reinforced thermoplastic composite products for the lightweight design of parts in large series production. Please refer to below products using this material for production

Based on this new material, the weight has been cut by around 1.50Kg per vehicle compared with injection molded component designs.Meanwhile,With the requirement for more fuel efficient and quiet vehicles, the underbody shield parts are fast growing.  The growth has resulted in the need for light, more rigid, and better acoustical performing shielding. MDC mould built these kinds of molds for many years and have experienced for solution of the design.

If you have any doubts or requirements, please don't hesitate to keep us in touch as below:

Taizhou HuangYan MDC Mould&Plastic Co.,ltd

No.35-1 Qingfeng rd, huangyan north industrial estate, Taizhou City, ZheJiang province, China 318020

T:+86+576-84616076;F:+86-576-84616079

E-mail:master@zjmdc.com website:http://www.zjmdc.com

 

Carbon Fiber Mold

  • Carbon Fiber Mold
  • SymaLITE mold
  • Contact US

    Email: master@zjmdc.com

    Tel: +86 576 84616076

    Fax: +86 576 84616079

    Mobile: +86 139 0657 3032

    Address: No.35-1, Qingfeng Road, North Industrial Estate, HuangYan, Zhejiang,China.

    Copyright © 2016 SMC mold/SMC mould/BMC mould/GMT mould/LFT/SMC tool/SMC tooling/MDC Mould All Rights Reserved.  XML浙公网安备 33100302000262号