MENU
Company News Industry News Mould Blog Tweets

Industry News

  >   News  /   Industry News

Amaplast sees Russia as an unstable market

Join Date: 2019-02-13

After the peak recorded in 2017, boosting hopes among Italian manufacturers of plastics and rubber processing machinery, equipment, and moulds, sales of technology to Russia in the first three quarters of 2018 have turned out to be sluggish.

Analyses of ISTAT foreign trade data by the Statistical Studies Center of Amaplast (trade association within CONFINDUSTRIA including over 160 manufacturers) show that exports to Russia fell off by 19.6% with respect to the first nine months of 2017, with an aggregate value of just under€60 million. Russia thus slips from eleventh to twelfth place in export market rankings for the sector.

However, assuming 2018 year-end data confirm this trend, the downturn is less accentuated than what have seen in the cycles of the past decade.

Extruders, flexographic printers, thermoforming machines, and moulds are the main “victims” of the slump, while blow-moulding machines, plants for mono/multifilament, and presses maintain an opposing trend.

The negative trend in sales to Russia is part of a general slowdown in Italian exports for the sector, which fell by 0.6% in the first three quarters of 2018 with respect to the same period in 2017, slipping a number of times into the negative zone by a few decimal points over the course of the year.

However, what is actually witnessed is a stabilization, which should not come as a great surprise and remains within the norm, after the strongly expansionary trend in the past 7-8 years (with the sole exception of 2013).

While still showing double-digit growth (+11.4%), imports for the sector have slowed from the +26% and +23% recorded in March and June, respectively.

The balance of trade, remaining strongly positive at €1.62 billion, shrank by five percentage points in the period in question.

Amaplast brings 40 Italian companies to Interplastica

In virtue of the importance of the Russian market for Italian machinery manufacturers - partly as a bridge to other countries in the area - Amaplast is organizing and coordinating the traditional national pavilion of about forty Italian companies, which will occupy some 700 square metres of exhibition space at the 22nd specialized Interplastica fair from 29 January to 1 February 2019 in Moscow.

Other Italian companies will participate independently or via the stands of their local agents or branches.

The Italian pavilion is the second largest after that of the Germans, whose supplies to Russian converters have lost significant ground in recent years to Chinese competitors. Like Italian exports, after a certain recovery in 2017, German sales to Russia also witnessed a new setback in the first nine months of 2018.

“In spite of persistent uncertainties in the Russian market,” commented Amaplast president Alessandro Grassi, “Italian manufacturers consider the specialized Moscow fair to be of strategic importance in presenting their technological innovations to, and directly meeting the demands of, producers of plastic and rubber products, and particularly those offering high quality articles, who are fully aware that technologically sophisticated machinery is necessary for processing these materials.”

“Unfortunately”, continued Grassi, “the sanctions imposed by the international community and the concomitant economic turbulence continue to threaten the stability of the Russian manufacturing sector and local demand. However, Italian manufacturers are still ready to provide advanced, flexible solutions to their Russian customers, in line with an Industry 4.0 standard while providing savings in terms of energy and materials consumption.”

The following Amaplast member companies will be present in the Italian collective at Interplastica 2019: Amut, Bausano & Figli, BG Plast Impianti, BMB, Borghi, Caccia Engineering, CMG srl, CMS, Colines, Comac, Elba, Euroviti, FB Balzanelli, Friul Filiere, Gamma Meccanica, Gefit, Gimatic, IPM, Itib Machinery International, Maris, Moretto, MOSS, Negri Bossi, Olmas, OMMPMoulds, Polivinil Rotomachinery, Previero/Sorema, Profile Dies, Promixon, Sica, Tecnomatic, Tecnova, Termostampi.

Carbon Fiber Mold

  • Carbon Fiber Mold
  • SymaLITE mold
  • Contact US

    Email: master@zjmdc.com

    Tel: +86 576 84616076

    Fax: +86 576 84616079

    Mobile: +86 139 0657 3032

    Address: No.35-1, Qingfeng Road, North Industrial Estate, HuangYan, Zhejiang,China.

    Copyright © 2016 SMC mold/SMC mould/BMC mould/GMT mould/LFT/SMC tool/SMC tooling/MDC Mould All Rights Reserved.  XML浙公网安备 33100302000262号