-
Carbon fiber molding attention
MDC is a professional carbon fiber mold manufacturer. We master a variety of carbon fiber molding processes. How to mold the carbon fiber? Three elements in carbon fiber compression molding.
View Detail04/03
2020 -
Introduction and application of compression moulding
Compression moulding is also suitable for the production of very large parts. Materials for compression moulding include: polyester glass fiber resin (SMC / BMC), carbon fiber, etc.
View Detail04/03
2020 -
Compression moulding process
The compression moulding process is a method specifically used to produce composite material parts to replace traditional metal parts. It is a moulding method that puts preheated polymer into an open heated mould cavity.
View Detail03/27
2020 -
compression molding for carbon fiber
The carbon fiber compression molding process is to put a certain amount of carbon fiber prepreg into the cavity of a metal mold, use a press machine with a heat source to generate a certain temperature and pressure
View Detail03/27
2020 -
China mold company
MDC Mould is a mold company in China, as a high quality Chinese Compression Molding supplier & manufacturer. The experience of mold design and manufacture spans many industries including Sanitary&Kitchenware, Automotive, Electrical, Transportation, SMC door skin, etc.
View Detail03/18
2020 -
SMC moulding
In above process, the material which placed into open mould are normally SMC, BMC,GMT etc compound material. So we always refer this type of comperssion mould to SMC mould, BMC mould, GMT mould.
View Detail03/13
2020 -
SMC Mould application
As a professional SMC Mould manufacturer in china, MDC mould can provide SMC mould and low volume quantities of SMC molding service with our customers.
View Detail02/25
2019 -
BMC Molding
BMC molding process is performed by compression in a BMC mold at a temperature and pressure of 130 -170oC (typically 20-100 bar) or in an injection molding machine (mold temperature of 145 -175oC, pressure 80-160 bar).
View Detail01/08
2019 -
Underbody shield mold
MDC Mould has produced many kinds of underbody shield parts including GMT, GMT+LWRT, GMT+GMTex, LWRT process, etc.
View Detail12/31
2018 -
SMC Shower base Mold
MDC Mould, as a professional SMC shower base mold manufacturer in china, was developing a new technology with our customers oversea.
View Detail12/10
2018