Compression moulding is the act of using compression (force) and heat to shape a raw material by means of a mold. In short, a raw material is heated until pliable, while the mold is closed for a certain time period. Upon removing the mold, the object may contain flash, excess product not conformed to the mold, which can be cut away.
Though objects can be made in a variety of ways, many manufacturers choose compression moulding due to its cost-effectiveness and efficiency. Compression moulding is one of the least expensive ways to mass-produce products. Furthermore, the method is highly efficient, leaving little material or energy to waste.
MDC think that for compression molding, material , shape , pressure, temperature, part thickness, cycle time must be considered, therefore , MDC spend a lot of time to do research about how to make the mold more balance and work well. If you have any doubts, please contact MDC MOULD.
Tel: +86 576 84616076
Fax: +86 576 84616079
Mobile: +86 139 0657 3032
Address: No.35-1, Qingfeng Road, North Industrial Estate, HuangYan, Zhejiang,China.