MENU
Company News Industry News Mould Blog Tweets

Mould Blog

  >   News  /   Mould Blog

Five types of compression tooling

Join Date: 2020-03-05

MDC Mould is a China company specialized in making SMC, BMC, GMT, LFT, Carbon Fiber, have abundant experience on tooling designing and manufacturering. MDC have strict quality control system and high efficiency work team, have many kinds of hydraulic press and oil temperature controller to make sure the compression moulding trial and parts production goes well. MDC provides various compression toolings and solutions for many industries and customers. These are several different types of toolings in our business.

SMC tooling

SMC Tooling

Sheet molding compound is glass-reinforced polymeric material, SMC delivers superior strength-to-weight with a Class A surface. The SMC tooling primarily used for automotive body panels, institutional seating and various other structural components.

BMC tooling

BMC Tooling

Bulk molding compounds offer great flow properties. Shorter glass fibers lessen the structure reinforcement, which creates a putty-like injection molding compound. BMC tooling is used to produce complex components such as electrical equipment, car components, housings for electrical appliances, in large industrial volumes.

carbon fber tooling

Carbon fiber tooling

Carbon fiber has many excellent properties, such as high axial strength and modulus, low density, ultra-high temperature resistance in non-oxidizing environment, good fatigue resistance, small coefficient of thermal expansion and good thermal conductivity. MDC has worked with many tier one molders for Car manufacturers regarding carbon fiber tooling projects. This enables us to provide a fast and professional tooling solutions in automotive manufacturing.

GMT Tooling

GMT tooling

GMT is Glass Mat Reinforced Thermoplasitcs, a kind of sheet molding compound with fiber reinforced thermoplastic. MDC Mould has developed kinds of GMT tooling for Daimler C, E, and AMG series, including GMT underbody shields, GMT protection cover, GMT brackets, as well as SMC bumper, SMC door panel, SMC Engine hood, etc.

LFT tooling

LFT tooling

LFT is bulk molding material that feature continuous fiber filaments running the full length of the pellet allowing these materials to exhibit simultaneous improvements in strength, stiffness, and impact resistance over a wide temperature range.
Meanwhile, D-LFT (Direct-long fiber thermoplastics) is available for injection or compression molding. Most D-LFT systems, for injection or compression molding systems, feed glass roving (or other fiber) into a twin-screw extruder (TSE), where it is chopped by the screws as it is mixed with molten polymer and additives that have been metered in separately. To improve surface finish, some systems use knives to prechop the roving prior to entrance into the TSE. This method generally yields a shorter fiber, while the direct roving feed produces longer fibers and yields parts with higher structural performance. Each approach uses different and specialized screw designs.

Carbon Fiber Mold

  • Carbon Fiber Mold
  • SymaLITE mold
  • Contact US

    Email: master@zjmdc.com

    Tel: +86 576 84616076

    Fax: +86 576 84616079

    Mobile: +86 139 0657 3032

    Address: No.35-1, Qingfeng Road, North Industrial Estate, HuangYan, Zhejiang,China.

    Friend Link:

    Copyright © 2016 MDC Mould& Plastic Co.,Ltd All Rights Reserved.  XML浙公网安备 33100302000262号