Specialize in Compression molds
The editor wants to introduce the SMC pedal mold. We have introduced its advantages before. The SMC mold is light in weight, but strong in strength, not easy to oxidize
View DetailAs we all know, doors are everywhere in our lives, and they are also very important. Door refers to ...
View DetailThermosetting plastic is plastic with thermosetting resin as the main component, together with various necessary additives to form products through the cross-linking and curing process.
View DetailSMC molding process is an advanced composite molding method, and mold is the basis of the SMC process, good product quality is guaranteed by reliable mold. Therefore, in the SMC molding process, the SMC mold design is especially important. In order to ensure the quality and process feasibility of the product, the shear edge and ejector system of the mold should be designed reasonably.
View DetailWhat are Short Cut Fiber Molding Compounds? Short-cut fiber molding compound is a prepreg widely used in compression molding process.
View DetailMolding compound are mainly composed of the resin matrix, reinforcing materials, fillers, pigments, etc. According to the process and performance requirements, the resin matrix also has various additives such as curing agents, thickeners, internal release agents, solvents, etc.
View DetailWhen compression molding thermoset molded materials, the preferred method of material handling is to use preforms. The process of producing preforms is called pre-pressing.
View DetailA plastic compression molding machine (press) is the main equipment for molding thermosetting plastics, and is a machine that applies pressure to a compression mold.
View DetailCompression moulds can be classified into three types: mobile, semi-fixed and fixed according to the state of the compression moulds with which they are fitted and installed on the hydraulic press.
View DetailSMC compression moulding is to cut the plastic into the desired shape, determine the number of layers to be added, remove the two sides of the film, laminate and place it on the smc mould.
View DetailContact US
Email: master@zjmdc.com
Tel: +86 576 84616076
Fax: +86 576 84616079
Mobile: +86 13906573507(Mr. Wang)
Address: No.116 mochuang road, Huangyan Xinqian street,Taizhou,Zhejiang,China